t a  e 
参考号 零件 参数
MAS : BJ81325 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot Material: Rubber
  • Greasable: No
  • Housing Press Fit Diameter: 50.4 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 1 Snap Ring
  • Stud Thread Diameter: 12 mm
  • Stud Type: Taper
  • Suspension Grade Type: Standard
  • Thread Pitch: M1.5
FVP : BJ81325 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Housing Press Fit Diameter: 50.4 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press
  • Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 1 Snap Ring
  • Stud Thread Diameter: 12 mm
  • Stud Type: Taper
  • Suspension Grade Type: Standard
  • Thread Pitch: M1.5
TRW : JBJ884SH Ball Joint
TRW : JBJ1207 Ball Joint
SUSPENSIA : X13BJ1470 Ball Joint
  • Greasable: No
  • Mounting Hardware Included: Yes
TRW : JBJ888 Ball Joint
DELPHI : TC5385 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: No
  • Color: Gray
  • Cotter Pin Hole: No
  • Cotter Pin Included: No
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: No
  • Grease Fitting Included: No
  • Height (IN): 5.0
  • Length (IN): 5
  • Length (MM): 127
  • Material: Steel
  • Maximum Outside Diameter (IN): 2.362
  • Maximum Outside Diameter (MM): 60.0
  • Mount Plate Included: No
  • Mounting Bolts Included: No
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Nuts Included: Yes
  • Position(s): Front Lower
  • Stud Taper Per Foot (IN): 0.167
  • Stud Tapered End 1 Diameter (in): 0.894
  • Stud Tapered End 1 Diameter (mm): 22.7
  • Stud Tapered End 2 Diameter (in): 0.717
  • Stud Tapered End 2 Diameter (mm): 18.2
  • Stud Thread Diameter (MM): 16.0
  • Stud Thread Length (IN): 1.28
  • Stud Thread Pitch (mm): 1.5
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Washers Included: Yes
  • Width (MM): 60.0
CENTRIC : 61067009 Ball Joint
  • Country of Origin: CN
  • Package Dimensions: 4.2 x 2.7 x 2.9 inches
  • Package Quantity: 1
  • Package Weight: 1.6 lb
  • Remanufactured Part: N
  • UPC: 805890790075
MEVOTECH : MK7411 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
ACDelco : 45D2294 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot: Yes
  • Greasable: Yes
  • Material: Steel
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Stud Type: Threaded
  • Type: Press In
SKP : SK7411 Ball Joint
CENTRIC : 61167009 Ball Joint
  • Country of Origin: CN
  • Package Dimensions: 2.6 x 4.1 x 2.9 inches
  • Package Quantity: 1
  • Package Weight: 1.45 lb
  • Remanufactured Part: N
  • UPC: 805890923954
MEVOTECH : GK7411 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Dust Boot: Yes
  • Finish: Paint
  • Mounting Type: Press In
FVP : BJ82275 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: No
  • Cotter Pin Hole: No
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Housing Press Fit Diameter: 44.5 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Pressed
  • Package Contents: 1 Ball Joint; 1 Nut; 1 Circle Clip
  • Stud Thread Diameter: 16 mm
  • Stud Type: Tapered
  • Suspension Grade Type: Standard
  • Thread Pitch: 1.5
QUICK STEER : K7411 Ball Joint
MOOG : K7411 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Material: Neoprene
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press-in
  • Suspension Grade Type: Standard
MEVOTECH : TXK7411 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Repel-TEK™
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
API : 2700277014 Ball Joint
SKP : SK500286 Ball Joint
ULTRA-POWER : K80628 Ball Joint
FVP : BJ81106 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: No
  • Cotter Pin Hole: No
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Housing Press Fit Diameter: 46.75 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press
  • Package Contents: 1 Ball Joint; 1 Nut; 1 Washer
  • Stud Thread Diameter: 14 MM
  • Stud Type: Taper
  • Suspension Grade Type: Standard
  • Thread Pitch: 1.5
QUICK STEER : K80628 Ball Joint
MEVOTECH : GS25545 Ball Joint
FVP : BJ82495 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: No
  • Castle Nut Included: No
  • Cotter Pin Hole: No
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Housing Press Fit Diameter: 44 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 6
  • Mounting Type: Press
  • Package Contents: 1 Ball Joint; 1 Nut; 1 Snap Ring
  • Stud Thread Diameter: 16 mm
  • Stud Type: Taper
  • Suspension Grade Type: Standard
  • Thread Pitch: 1.5
QUICK STEER : K500286 Ball Joint
ULTRA-POWER : K100115 Ball Joint
TRW : JBJ1138 Ball Joint
FVP : AK811025 Ball Joint
  • Adjustable: Yes
  • Castle Nut Included: No
  • Cotter Pin Hole: No
  • Dust Boot: Yes
  • Greaseable: Yes
  • Locking Nut Included: Yes
  • Material: Metal
  • Maximum Outside Diameter: 53.5 mm
  • Mounting Hole Quantity: 0
  • Mounting Type: Pressed
  • Package Contents: Ball Joint; Nuts; Zerk Fitting; Lock Plate
  • Stud Thread Diameter: 14 MM
  • Stud Type: Taper
  • Suspension Grade Type: Standard
  • Thread Pitch: 1.5
TRW : JBJ1142 Ball Joint
DELPHI : TC7971 Ball Joint
  • Ball Joint Assembly: Yes
  • Castle Nut Included: No
  • Color: Silver
  • Cotter Pin Hole: No
  • Cotter Pin Included: No
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Grease Fitting Included: No
  • Material: Steel
  • Maximum Outside Diameter (IN): 2.13
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Position(s): Front Upper
  • Stud Type: Threaded
  • Tapered Stud: Yes
MOOG : K500344 Ball Joint
  • Adjustable: No
  • Castle Nut Included: Yes
  • Greasable: No
MOOG : K80628 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Material: Neoprene
  • Maximum Outside Diameter: 2.160 in
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press-in
  • Suspension Grade Type: Standard
TRW : JBJ915 Ball Joint
SUSPENSIA : X13BJ0216 Ball Joint
  • Mounting Hardware Included: Yes
MEVOTECH : MS25545 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Dust Boot: Yes
  • Dust Boot Color: Blue
  • Dust Boot Material: Neoprene
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Locking Nut Included: Yes
  • Mounting Hardware Included: Yes
  • Pre Greased: Yes
  • Stud Type: Threaded
MOOG : K500286 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Mounting Hardware Included: Yes
MEVOTECH : MK80630 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
MOOG : K500286T005 Ball Joint
  • Country of Origin: US
  • Package Dimensions: 5.250 x 3.250 x 2.625 inches
  • Package Quantity: 1
  • Package Weight: 1.521 lb
  • UPC: 080066718187
ACDelco : 45D1535 Ball Joint
  • Type: Front Lower
DELPHI : TC5844 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Color: Black
  • Cotter Pin Hole: No
  • Dust Boot: Yes
  • Dust Boot Material: Rubber
  • Greasable: No
  • Grease Fitting Included: No
  • Height (IN): 5.83
  • Material: Steel
  • Maximum Outside Diameter (IN): 2.1
  • Maximum Outside Diameter (MM): 53.34
  • Mount Plate Included: No
  • Mounting Type: Bolt In
  • Nuts Included: Yes
  • Position(s): Front Upper
  • Stud Tapered End 1 Diameter (in): 0.67
  • Stud Tapered End 1 Diameter (mm): 17.018
  • Stud Tapered End 2 Diameter (in): 0.786
  • Stud Tapered End 2 Diameter (mm): 19.9644
  • Stud Thread Diameter (MM): 14.0
  • Stud Thread Length (IN): 1.6
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Washers Included: Yes
MEVOTECH : MS25522 Ball Joint
  • Adjustable: Yes
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Mounting Type: Press In
  • Stud Type: Threaded
MOOG : K100115 Ball Joint
  • Adjustable: Yes
  • Greasable: No
  • Mounting Hardware Included: Yes
ACDelco : 45K4031 Ball Joint
  • Adjustable: Yes
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: No
  • Dust Boot: Yes
  • Greasable: Yes
  • Material: Steel
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Stud Type: Threaded
  • Type: Caster Camber
ACDelco : 45K4033 Ball Joint
  • Adjustable: Yes
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: No
  • Dust Boot: Yes
  • Greasable: No
  • Material: Steel
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Stud Type: Threaded
  • Type: Caster Camber
MOOG : K100316 Ball Joint
  • Adjustable: Yes
  • Greasable: No
  • Mounting Hardware Included: Yes
MEVOTECH : TXMS25545 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Ball Stud Thread Size: M12 x 1.75
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Color: Green
  • Dust Boot Material: Neoprene
  • Finish: Repel-TEK™
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
MEVOTECH : TXMS25563 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Repel-TEK™
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
DELPHI : TC2443 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: No
  • Color: Gray
  • Cotter Pin Hole: No
  • Cotter Pin Included: No
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: No
  • Grease Fitting Included: No
  • Height (IN): 4.882
  • Length (MM): 124
  • Material: Steel
  • Maximum Outside Diameter (IN): 2.165
  • Maximum Outside Diameter (MM): 55.0
  • Mount Plate Included: No
  • Mounting Bolts Included: No
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Nuts Included: Yes
  • Position(s): Front Upper
  • Stud Taper Per Foot (IN): 0.167
  • Stud Tapered End 1 Diameter (in): 0.783
  • Stud Tapered End 1 Diameter (mm): 19.9
  • Stud Tapered End 2 Diameter (in): 0.669
  • Stud Tapered End 2 Diameter (mm): 17.0
  • Stud Thread Diameter (MM): 14.0
  • Stud Thread Length (IN): 1.161
  • Stud Thread Pitch (mm): 1.5
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Washers Included: Yes
  • Width (MM): 55.0
CENTRIC : 61067000 Ball Joint
  • Country of Origin: TW
  • Package Quantity: 1
  • Remanufactured Part: N
  • UPC: 889590357950
MOOG : K500176 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: No
  • Greasable: Yes
  • Material: Neoprene
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press-in
  • Suspension Grade Type: Standard
MOOG : K500138 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Material: Neoprene
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Thread-In
TRW : JBJ1139 Ball Joint
TRW : JBJ587 Ball Joint
MEVOTECH : MS25519 Ball Joint
  • Country of Origin: CN
  • Package Dimensions: 5.00 x 4.85 x 3.00 inches
  • Package Quantity: 1
  • Package Weight: 1.8 lb
  • UPC: 677319351552
MEVOTECH : MS25520 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Color: Blue
  • Dust Boot Material: Neoprene
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
  • Thread Size: M12 x 1.5
  • Wrench Size: 18.0 mm
DELPHI : TC5891 Ball Joint
  • Adjustable: No
  • Dust Boot: Yes
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Position(s): Front Upper
  • Stud Thread Diameter (IN): 0.787
ACDelco : 45D1170 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Dust Boot: Yes
  • Greasable: Yes
  • Stud Type: Threaded
MOOG : K100140 Ball Joint
  • Adjustable: Yes
  • Cotter Pin Hole: No
  • Greasable: Yes
  • Material: Neoprene
  • Maximum Outside Diameter: 2.350 in
  • Mounting Hardware Included: No
  • Mounting Type: Thread-In
  • Suspension Grade Type: Standard
DELPHI : TC5834 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Color: Black
  • Cotter Pin Hole: No
  • Dust Boot: Yes
  • Dust Boot Material: Rubber
  • Greasable: Yes
  • Height (IN): 4.825
  • Material: Steel
  • Maximum Outside Diameter (IN): 1.035
  • Maximum Outside Diameter (MM): 26.289
  • Mount Plate Included: No
  • Mounting Type: Press fit
  • Nuts Included: Yes
  • Position(s): Front Upper
  • Stud Thread Diameter (IN): 0.82
  • Stud Thread Diameter (MM): 20.828
  • Stud Thread Length (IN): 1.025
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Washers Included: No
MEVOTECH : MS25066 Ball Joint
  • Adjustable: Yes
  • Ball Joint Assembly: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Type: Press In
ACDelco : 45K4024 Ball Joint
  • Adjustable: Yes
  • Dust Boot: Yes
  • Material: Steel
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Type: Caster Camber
SKP : SK500138 Ball Joint
SKP : SK500176 Ball Joint
QUICK STEER : K500176 Ball Joint
MEVOTECH : TXMS25520 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Ball Stud Thread Size: M12 x 1.5
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Color: Green
  • Dust Boot Material: Neoprene
  • Finish: Repel-TEK™
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Locking Nut Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
  • Wrench Size: 0.71 IN
MEVOTECH : TXMS25519 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Ball Stud Thread Size: M20 x 1.5
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Color: Green
  • Dust Boot Material: Neoprene
  • Finish: Repel-TEK™
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Thread in
  • Pre Greased: Yes
  • Stud Type: Threaded
  • Wrench Size: 1.18 in
SPECIALTY PRODUCTS : 23852 Ball Joint
  • Country of Origin: US
  • Package Dimensions: 6.5 x 3.5 x 3.5 inches
  • Package Quantity: 1
  • Package Weight: 2.7 lb
  • UPC: 082642238522
MOOG : K500310 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: No
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
DELPHI : TC2170 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: Yes
  • Color: Gray
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Height (IN): 4.591
  • Height (MM): 116.6
  • Material: Steel
  • Maximum Outside Diameter (IN): 2.5
  • Maximum Outside Diameter (MM): 63.5
  • Mount Plate Included: No
  • Mounting Hardware Included: Yes
  • Mounting Type: Pressed
  • Nuts Included: Yes
  • Position(s): Front Lower
  • Stud Tapered End 1 Diameter (in): 0.724
  • Stud Tapered End 1 Diameter (mm): 18.4
  • Stud Tapered End 2 Diameter (in): 0.917
  • Stud Tapered End 2 Diameter (mm): 23.3
  • Stud Thread Diameter (IN): 0.63
  • Stud Thread Diameter (MM): 16.0
  • Stud Thread Length (IN): 0.984
  • Stud Thread Length (MM): 25.0
  • Stud Thread Pitch (mm): 1.5
  • Stud Type: Threaded
  • Tapered Stud: Yes
  • Washers Included: No
  • Width (MM): 63.5
MEVOTECH : MS25517 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Mounting Hardware Included: Yes
  • Mounting Type: Bolt In
  • Stud Type: Threaded
MOPAR : 68167888AA Ball Joint
DELPHI : TC6947 Ball Joint
  • Adjustable: Yes
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: No
  • Color: Silver
  • Cotter Pin Hole: No
  • Cotter Pin Included: No
  • Country of Origin: US
  • Distance Between Mounting Holes: 83.82 MM
  • Dust Boot Included: Yes
  • Dust Boot Material: Chloroprene Rubber
  • Grease Fitting Included: Yes
  • Greaseable: Yes
  • Height: 95.25 MM
  • Material: Steel
  • Mount Plate Included: Yes
  • Mounting Bolt Length: 37.46 MM
  • Mounting Bolt Shank Diameter: 12.0 MM
  • Mounting Bolt Thread Diameter: 12.0 MM
  • Mounting Bolt Thread Length: 29.84 MM
  • Mounting Bolt Thread Pitch: 1.25 MM
  • Mounting Bolts Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt In
  • Nuts Included: No
  • Package Dimensions: 3.97 x 3.97 x 4.84 inches
  • Package Quantity: 1
  • Package Weight: 2.59 lb
  • Position(s): Front Lower
  • Stud Thread Diameter: 16.0 MM
  • Stud Thread Length: 29.84 MM
  • Stud Thread Pitch: 1.5 MM
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • UPC: 689604381663
  • Washers Included: Yes
  • Width: 112.26 MM
  • Wrench Size: 19.0 MM
ULTRA-POWER : K500310 Ball Joint
MEVOTECH : TXMS25517 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Repel-TEK™
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Bolt In
  • Pre Greased: Yes
  • Stud Type: Threaded
SKP : SK500082 Ball Joint
QUICK STEER : K500082 Ball Joint
MEVOTECH : GS25507 Ball Joint
SUSPENSIA : X09BJ6543 Ball Joint
  • Mounting Hardware Included: Yes
TRW : JBJ168 Ball Joint
DELPHI : TC5288 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Color: Gray
  • Cotter Pin Hole: No
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Height (IN): 3.728
  • Height (MM): 94.7
  • Material: Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040
  • Mount Plate Included: No
  • Mounting Hardware Included: Yes
  • Mounting Type: Pressed
  • Nuts Included: Yes
  • Position(s): Front Lower
  • Stud Tapered End 1 Diameter (in): 0.61
  • Stud Tapered End 1 Diameter (mm): 15.5
  • Stud Tapered End 2 Diameter (in): 0.748
  • Stud Tapered End 2 Diameter (mm): 19.0
  • Stud Thread Diameter (IN): 0.47
  • Stud Thread Diameter (MM): 12.0
  • Stud Thread Length (IN): 0.945
  • Stud Thread Length (MM): 24.0
  • Stud Thread Pitch (mm): 1.5
  • Tapered Stud: Yes
  • Washers Included: No
  • Width (MM): 55.5
MOOG : K500082 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Material: Neoprene
  • Maximum Outside Diameter: 2.280 in
  • Mounting Hardware Included: Yes
  • Mounting Type: Press-in
  • Suspension Grade Type: Standard
MEVOTECH : MS25507 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
ACDelco : 45D2425 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot: Yes
  • Greasable: Yes
  • Material: Steel
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Stud Type: Threaded
  • Type: Press In
MEVOTECH : TXMS25507 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Repel-TEK™
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
TRW : 104365 Ball Joint
MOOG : K7467T006 Ball Joint
  • Country of Origin: US
  • Package Dimensions: 5.25 x 3.25 x 2.63 inches
  • Package Quantity: 1
  • Package Weight: 1.9 lb
  • UPC: 080066705330
CENTRIC : 61067015 Ball Joint
  • Country of Origin: CN
  • Package Dimensions: 3.8 x 3.2 x 3.5 inches
  • Package Quantity: 1
  • Package Weight: 2.2 lb
  • Remanufactured Part: N
  • UPC: 805890790129
SUSPENSIA : X13BJ0043 Ball Joint
  • Greasable: No
  • Mounting Hardware Included: Yes
TRW : JBJ893 Ball Joint
MOOG : K500316 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: No
  • Mounting Hardware Included: Yes
SUSPENSIA : X13BJ0119 Ball Joint
  • Greasable: No
  • Mounting Hardware Included: Yes
MEVOTECH : MS25573 Ball Joint
  • Adjustable: No
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Color: Blue
  • Dust Boot Material: Neoprene
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
DELPHI : TC6375 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: Yes
  • Color: Black
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Height (IN): 2.76
  • Height (MM): 70.0
  • Length (MM): 125
  • Material: Steel
  • Maximum Outside Diameter (IN): 2.76
  • Maximum Outside Diameter (MM): 70.0
  • Mounting Hardware Included: No
  • Mounting Type: Press In
  • Nuts Included: No
  • Position(s): Front Lower
  • Stud Thread Diameter (IN): 0.79
  • Stud Thread Diameter (MM): 20.0
  • Stud Thread Length (IN): 1.14
  • Stud Thread Length (MM): 29.0
  • Suspension Grade Type: Standard
  • Type: Threaded
  • Washers Included: No
  • Width (MM): 70.1
SUSPENSIA : X13BJ0289 Ball Joint
  • Greasable: No
  • Maximum Outside Diameter: 50.25 mm
  • Stud Tapered End 1 Diameter: 22.6 mm
  • Stud Tapered End 2 Diameter: 26.1 MM
  • Stud Thread Diameter: 20 mm
  • Stud Thread Pitch: 1.5 mm
MOOG : K7465 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Material: Neoprene
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press-in
  • Suspension Grade Type: Standard
CENTRIC : 61067031 Ball Joint
  • Country of Origin: CN
  • Package Dimensions: 4.2 x 2.7 x 2.9 inches
  • Package Quantity: 1
  • Package Weight: 1.4 lb
  • Remanufactured Part: N
  • UPC: 805890790280
TRW : JBJ883 Ball Joint
TRW : JBJ884 Ball Joint
ACDelco : 45D0134 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: No
  • Dust Boot: Yes
  • Greasable: Yes
  • Material: Steel
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Stud Type: Threaded
DELPHI : TC6205 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Color: Black
  • Cotter Pin Hole: No
  • Dust Boot: Yes
  • Dust Boot Material: Rubber
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Material: Steel
  • Maximum Outside Diameter (MM): 46.6
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Nuts Included: Yes
  • Position(s): Front Upper
  • Stud Tapered End 1 Diameter (mm): 16.5
  • Stud Tapered End 2 Diameter (mm): 19.85
  • Stud Thread Length (MM): 23.8
  • Stud Type: Tapered
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Wrench Size (mm): 21.0
206
条记录,分
3
页显示
按品牌拼音首字母查找:

      尺寸/参数

      标注 名称 尺寸范围 单位
          

      联系客服

      客服电话:020-36390347