SUSPENSIA : X34BJ2816 |
Ball Joint |
- Mounting Hardware Included: Yes ;
|
SUSPENSIA : X34BJ2815 |
Ball Joint |
- Mounting Hardware Included: Yes ;
|
MEVOTECH : MS10526 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot: Yes ;
- Finish: Corrosion Resistant ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press In ;
|
MEVOTECH : MS10527 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot: Yes ;
- Finish: Corrosion Resistant ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
|
DELPHI : TC5057 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Color: Gray ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Height (IN): 3.661 ;
- Height (MM): 93.0 ;
- Length (MM): 93 ;
- Material: Steel ;
- Maximum Outside Diameter (IN): 2.11 ;
- Maximum Outside Diameter (MM): 53.6 ;
- Mount Plate Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Pressed ;
- Nuts Included: Yes ;
- Position(s): Front Lower Inner ;
- Stud Tapered End 1 Diameter (in): 0.744 ;
- Stud Tapered End 1 Diameter (mm): 18.9 ;
- Stud Tapered End 2 Diameter (in): 0.941 ;
- Stud Tapered End 2 Diameter (mm): 23.9 ;
- Stud Thread Diameter (IN): 0.551 ;
- Stud Thread Diameter (MM): 14.0 ;
- Stud Thread Length (IN): 0.846 ;
- Stud Thread Length (MM): 21.5 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Washers Included: No ;
- Width (MM): 53.6 ;
- Wrench Size (mm): 45.0 ;
|
FVP : BJ29034 |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: No ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Material: Rubber ;
- Greaseable: No ;
- Material: Steel ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Package Contents: 1 Ball Joint; 1 Nut; 2 Lock Nuts; 2 Washers ;
- Stud Thread Diameter: 12 mm ;
- Stud Type: Taper ;
- Suspension Grade Type: Standard ;
- Thread Pitch: 1.5 ;
|
FVP : BJ29035 |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: No ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Material: Rubber ;
- Greaseable: No ;
- Housing Press Fit Diameter: 44.6 MM ;
- Material: Steel ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 6 ;
- Mounting Type: Press ;
- Package Contents: 1 Ball Joint; 1 Lock Nut ;
- Stud Thread Diameter: 14 MM ;
- Stud Type: Taper ;
- Suspension Grade Type: Standard ;
- Thread Pitch: 1.5 ;
|
FVP : BJ29033 |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: No ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Material: Rubber ;
- Greaseable: No ;
- Material: Steel ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Package Contents: 1 Ball Joint; 2 Lock Nuts; 2 Washers; 1 Nut ;
- Stud Thread Diameter: 12 mm ;
- Stud Type: Taper ;
- Suspension Grade Type: Standard ;
- Thread Pitch: 1.5 ;
|
SUSPENSIA : X34BJ2809 |
Ball Joint |
- Mounting Hardware Included: Yes ;
|
TRW : JBJ1055 |
Ball Joint |
|
TRW : JBJ1054 |
Ball Joint |
|
MOOG : K500220 |
Ball Joint |
- Adjustable: No ;
- Greasable: No ;
- Material: Neoprene ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt-on ;
|
DELPHI : TC2233 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Distance Between Mounting Holes (MM): 48.0 ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Height (IN): 2.126 ;
- Height (MM): 54.0 ;
- Length (MM): 134 ;
- Material: Steel ;
- Maximum Outside Diameter (IN): 3.228 ;
- Maximum Outside Diameter (MM): 82.0 ;
- Mount Plate Included: No ;
- Mounting Bolt Shank Diameter (MM): 17.0 ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Position(s): Front Left Lower, Front Left. For the position specific to your vehicle, refer to the Application tab. ;
- Stud Tapered End 1 Diameter (in): 0.821 ;
- Stud Tapered End 1 Diameter (mm): 20.85 ;
- Stud Tapered End 2 Diameter (in): 0.685 ;
- Stud Tapered End 2 Diameter (mm): 17.4 ;
- Stud Thread Length (IN): 0.878 ;
- Stud Thread Length (MM): 22.3 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Type: Premium ;
- Washers Included: Yes ;
- Width (MM): 82.0 ;
|
DELPHI : TC2234 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Distance Between Mounting Holes (MM): 48.0 ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Height (IN): 2.126 ;
- Height (MM): 54.0 ;
- Length (MM): 134 ;
- Material: Steel ;
- Maximum Outside Diameter (IN): 3.228 ;
- Maximum Outside Diameter (MM): 82.0 ;
- Mount Plate Included: No ;
- Mounting Bolt Shank Diameter (MM): 17.0 ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Position(s): Front Right Lower, Front Right. For the position specific to your vehicle, refer to the Application tab. ;
- Stud Tapered End 1 Diameter (in): 0.781 ;
- Stud Tapered End 1 Diameter (mm): 19.85 ;
- Stud Tapered End 2 Diameter (in): 0.646 ;
- Stud Tapered End 2 Diameter (mm): 16.4 ;
- Stud Thread Length (IN): 0.878 ;
- Stud Thread Length (MM): 22.3 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Type: Premium ;
- Washers Included: Yes ;
- Width (MM): 82.0 ;
|
SKP : SK500006RA |
Ball Joint |
|
ULTRA-POWER : K500006 |
Ball Joint |
|
MAS : BJ29015 |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: Yes ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Material: Polychloroprene ;
- Greasable: No ;
- Housing Press Fit Diameter: 37 mm ;
- Material: Steel ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Package Contents: 1 Ball Joint; 2 Bolts; 2 Nuts; 2 Washers ;
- Stud Thread Diameter: 12 mm ;
- Stud Type: Taper ;
- Suspension Grade Type: Standard ;
- Thread Pitch: 1.5 mm ;
|
API : 270044306 |
Ball Joint |
|
MEVOTECH : GS10508 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot: Yes ;
- Finish: Paint ;
- Mounting Type: Bolt In ;
- Stud Type: Threaded ;
|
VAICO : V207177 |
Ball Joint |
|
REIN : SCB0212R |
Ball Joint |
|
MEVOTECH : GS10506 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot: Yes ;
- Finish: Paint ;
- Mounting Type: Bolt In ;
- Stud Type: Threaded ;
|
REIN : SCB0078 |
Ball Joint |
- Attachment Type: Not Applicable ;
- Ball Joint Material: Rubber ;
- Grease Fittings Included: Not Required ;
- Greaseable: Not Required ;
- Joint Housing Material: Metal ;
- Joint Stud Type: Not Applicable ;
|
REIN : SCB0077 |
Ball Joint |
- Attachment Type: Bolt On ;
- Ball Joint Material: Metal ;
- Grease Fittings Included: Not Required ;
- Greaseable: Not Required ;
- Joint Housing Material: Metal ;
- Joint Stud Type: Not Applicable ;
|
VAICO : V207176 |
Ball Joint |
|
VAICO : V207175 |
Ball Joint |
|
SUSPENSIA : X34BJ2795 |
Ball Joint |
- Mounting Hardware Included: Yes ;
|
SUSPENSIA : X34BJ2800 |
Ball Joint |
- Mounting Hardware Included: Yes ;
|
DELPHI : TC1278 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Color: Gray ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Distance Between Mounting Holes (MM): 138.0 ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Height (IN): 3.87 ;
- Height (MM): 98.3 ;
- Length (MM): 171 ;
- Material: Steel ;
- Maximum Outside Diameter (IN): 1.85 ;
- Maximum Outside Diameter (MM): 47.0 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Position(s): Front Inner Lower Right ;
- Stud Tapered End 1 Diameter (in): 0.65 ;
- Stud Tapered End 1 Diameter (mm): 16.5 ;
- Stud Tapered End 2 Diameter (in): 0.835 ;
- Stud Tapered End 2 Diameter (mm): 21.2 ;
- Stud Thread Diameter (IN): 0.551 ;
- Stud Thread Diameter (MM): 14.0 ;
- Stud Thread Length (IN): 0.945 ;
- Stud Thread Length (MM): 24.0 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Washers Included: No ;
- Width (MM): 80.0 ;
- Wrench Size (IN): 0.866 ;
- Wrench Size (mm): 22.0 ;
|
DELPHI : TC1277 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Color: Gray ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Distance Between Mounting Holes (MM): 138.0 ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Height (IN): 3.87 ;
- Height (MM): 98.3 ;
- Length (MM): 171 ;
- Material: Steel ;
- Maximum Outside Diameter (IN): 1.85 ;
- Maximum Outside Diameter (MM): 47.0 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Position(s): Front Inner Lower Left ;
- Stud Tapered End 1 Diameter (in): 0.65 ;
- Stud Tapered End 1 Diameter (mm): 16.5 ;
- Stud Tapered End 2 Diameter (in): 0.835 ;
- Stud Tapered End 2 Diameter (mm): 21.2 ;
- Stud Thread Diameter (IN): 0.551 ;
- Stud Thread Diameter (MM): 14.0 ;
- Stud Thread Length (IN): 0.945 ;
- Stud Thread Length (MM): 24.0 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Washers Included: No ;
- Width (MM): 80.0 ;
- Wrench Size (IN): 0.866 ;
- Wrench Size (mm): 22.0 ;
|
DELPHI : TC1155 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Distance Between Mounting Holes (MM): 68.0 ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Height (IN): 1.772 ;
- Height (MM): 45.0 ;
- Length (MM): 90 ;
- Material: Steel ;
- Maximum Outside Diameter (IN): 3.071 ;
- Maximum Outside Diameter (MM): 78.0 ;
- Mount Plate Included: No ;
- Mounting Bolt Head Diameter (MM): 20.8 ;
- Mounting Bolt Length (IN): 1.15 ;
- Mounting Bolt Length (MM): 29.2 ;
- Mounting Bolt Shank Diameter (MM): 10.5 ;
- Mounting Bolt Thread Length (MM): 20.0 ;
- Mounting Bolt Thread Pitch (MM): 1.5 ;
- Mounting Bolts Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Position(s): Front Lower Outer ;
- Stud Tapered End 1 Diameter (in): 0.677 ;
- Stud Tapered End 1 Diameter (mm): 17.2 ;
- Stud Tapered End 2 Diameter (in): 0.591 ;
- Stud Tapered End 2 Diameter (mm): 15.0 ;
- Stud Thread Length (IN): 0.709 ;
- Stud Thread Length (MM): 18.0 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Type: Premium ;
- Washers Included: No ;
- Width (MM): 78.0 ;
|
SUSPENSIA : X34BJ2801 |
Ball Joint |
- Mounting Bolts Included: Yes ;
- Mounting Hardware Included: Yes ;
|
TRW : JBJ1074 |
Ball Joint |
|
MOOG : K500006 |
Ball Joint |
- Adjustable: No ;
- Greasable: No ;
- Material: Neoprene ;
- Maximum Outside Diameter: 2.670 in ;
- Mounting Hardware Included: No ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: 2 BOLT ;
|
TRW : JBJ745 |
Ball Joint |
|
TRW : JBJ747 |
Ball Joint |
|
CENTRIC : 61034003 |
Ball Joint |
- Adjustable: No ;
- Bushing Material: Poly ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Dust Boot: Yes ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: No ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt-on ;
- Nuts Included: No ;
- Stud Tapered End 1 Diameter: 14.8 mm ;
- Stud Type: Threaded ;
- Tapered Stud: Yes ;
- Washers Included: No ;
|
MEVOTECH : MS10506 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot: Yes ;
- Finish: Corrosion Resistant ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt In ;
- Stud Type: Threaded ;
|
MEVOTECH : MS10508 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot: Yes ;
- Finish: Corrosion Resistant ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt In ;
- Stud Type: Threaded ;
|
LEMFÖRDER : 2538301 |
Ball Joint |
- Outer Thread [mm]: 12x1,5 ;
|
ACDelco : 45D2356 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot: Yes ;
- Greasable: No ;
- Material: Steel ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Stud Type: Threaded ;
|
ULTRA-POWER : K500219 |
Ball Joint |
|
VAICO : V201434 |
Ball Joint |
- Outer diameter (MM): 44.6 ;
- Outer thread (mm): M14 x 1.5 ;
|
VAICO : V200973 |
Ball Joint |
|
VAICO : V200974 |
Ball Joint |
|
DELPHI : TC5020 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Distance Between Mounting Holes (MM): 70.0 ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Height (IN): 1.969 ;
- Height (MM): 50.0 ;
- Length (MM): 93 ;
- Material: Chromium Steel ;
- Maximum Outside Diameter (IN): 3.543 ;
- Maximum Outside Diameter (MM): 90.0 ;
- Mount Plate Included: No ;
- Mounting Bolt Head Diameter (IN): 0.772 ;
- Mounting Bolt Head Diameter (MM): 19.6 ;
- Mounting Bolt Length (IN): 1.039 ;
- Mounting Bolt Length (MM): 26.4 ;
- Mounting Bolt Shank Diameter (IN): 0.421 ;
- Mounting Bolt Shank Diameter (MM): 10.7 ;
- Mounting Bolt Thread Length (IN): 0.787 ;
- Mounting Bolt Thread Length (MM): 20.0 ;
- Mounting Bolt Thread Pitch (MM): 1.5 ;
- Mounting Bolts Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Nuts Included: Yes ;
- Position(s): Front Lower Outer ;
- Stud Tapered End 1 Diameter (in): 0.825 ;
- Stud Tapered End 1 Diameter (mm): 20.95 ;
- Stud Tapered End 2 Diameter (in): 0.657 ;
- Stud Tapered End 2 Diameter (mm): 16.7 ;
- Stud Thread Length (IN): 0.945 ;
- Stud Thread Length (MM): 24.0 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Type: Premium ;
- Washers Included: Yes ;
- Width (MM): 90.0 ;
|
SUSPENSIA : X34BJ2825 |
Ball Joint |
- Mounting Hardware Included: Yes ;
|
TRW : JBJ1201 |
Ball Joint |
|
MEVOTECH : MS10563 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot: Yes ;
- Finish: Corrosion Resistant ;
- Mounting Type: Bolt In ;
- Stud Type: Threaded ;
|
FVP : BJ29045 |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Material: No ;
- Greaseable: No ;
- Material: Steel ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 2 Bolts; 2 Washers ;
- Stud Thread Diameter: 14 MM ;
- Stud Type: Taper ;
- Suspension Grade Type: Standard ;
- Thread Pitch: M1.5 ;
|
ULTRA-POWER : K500230 |
Ball Joint |
|
TRW : JBJ746 |
Ball Joint |
|
VAICO : V202753 |
Ball Joint |
|
VAICO : V202828 |
Ball Joint |
|
MAS : BJ29013 |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: Yes ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Material: Rubber ;
- Greasable: No ;
- Material: Steel ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt On ;
- Package Contents: 1 Ball Joint; 1 Nut ;
- Stud Thread Diameter: 14 MM ;
- Stud Type: Taper ;
- Suspension Grade Type: Standard ;
- Thread Pitch: 1.5 mm ;
|
MAS : BJ29014 |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: No ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Material: Rubber ;
- Greasable: No ;
- Material: Steel ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt On ;
- Package Contents: 1 Ball Joint; 1 Nut ;
- Stud Thread Diameter: 14 MM ;
- Stud Type: Tapered ;
- Suspension Grade Type: Standard ;
- Thread Pitch: 1.5 mm ;
|
MOOG : K500219 |
Ball Joint |
- Adjustable: No ;
- Greasable: No ;
- Material: Neoprene ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt-on ;
|
QUICK STEER : K500111 |
Ball Joint |
|